Home
Contact Us
This Page
About Us

Updated on June 17, 2010.

WE ARE CURRENTLY PURCHASING MORE INVENTORY AND CANNOT ENSURE THAT OUR WEBSITE IS COMPLETELY UP-TO-DATE. FOR A COMPLETE LISTING, PLEASE CONTACT US AT 519-624-8616.

FOR MORE INFORMATION, CHECK OFF THE PRESSES OF INTEREST AND FILL IN THE FORM BELOW.


TRANSFER PRESSES

  SCHULER, Tri-Axis or X-Bar Transfer, (2) Slides - 1750T/2000T, 144” Bed, 8-18 SPM, Windows, (4) Rolling bolsters, Like New!, (2) Available - XB1001
  3000 Ton VERSON, Transfer press, LINK MOTION, 204” Bed, 8-20 SPM, (2) Rolling bolsters, Like new - P53995

STRAIGHT SIDE PRESSES

  3000 Ton CLEARING, 252” Bed, 12 SPM, Hyd. clutch/brake, Transfer system available, Very good - P53971
  3000 Ton VERSON, Transfer press, LINK MOTION, 214” Bed, 8-20 SPM, (2) Rolling bolsters, Like new - P53995
  2000 Ton CLEARING, 300” Bed, 16 SPM, Windows, Very good - P53852
  2000 Ton CLEARING, 252” Bed, 12 SPM, Hyd. clutch/brake, Transfer system available, Very good - P53970
  2000 Ton BLISS, 240” Bed, 14 SPM, Cushions, Rolling bolster, Very good - P53920
  2000 Ton BLISS, 200” Bed, 12 SPM, Windows can be added, Very good - P53854
  2000 Ton SCHULER, 190” Bed, 10-25 SPM, Windows, Rolling bolster, HMS Transfer System available - P53986
  2000 Ton VERSON, 186” Bed, 15-45 SPM, Windows, Blank stacker and Coil Feedline included - P53046
  1600 Ton DANLY, 144” Bed, 30" Stroke, 8-16 SPM, Windows, Very good - P53989
  1600 Ton BLISS, 132” Bed, 13 SPM, Windows, Cushions, Very good, Great for Tryout! - P53951
  1500 Ton BLISS, 160” Bed, 16 SPM, Windows, Cushions, Very good condition, (5) Available - P53966
  1500 Ton CLEARING, 120” Bed, 15 SPM, Good condition, Great for Tryout! - P53878
  1400 Ton ERFURT, 156” Bed, 24” stroke, 15 SPM, Windows, May be seen under power - P53992
  1000 Ton VERSON, 184” Bed, 24” stroke, Cushions, Windows, Very good condition - P53941
  1000 Ton DANLY, 180” Bed, 25 SPM, Rolling bolster, Good condition - P53844
  1000 Ton DANLY, 144” Bed, 36” stroke, 8-20 SPM, Windows, (2) Rolling bolsters - P53938
  1000 Ton DANLY, 120” Bed, 20” stroke, Cushions, Hyd. Overloads, Very good condition, (3) Available - P53004
  1000 Ton VERSON, 108” Bed, 20-60 SPM, Windows, Floor Standing, OVERHAULED - P53997
  1000 Ton BLISS, 108” Bed, 18-35 SPM, Windows, Cushions, Very good condition - P53958
  800 Ton VERSON, 168” Bed, 12” Stroke, 20 SPM, Windows, Very good condition - P53899
  800 Ton DANLY, 156” Bed, 32” stroke, 18 SPM, Rolling bolster, (5) Available - P53940
  800 Ton STEELWELD, 144” Bed, 15 SPM, Windows, Cushions, CHEAP! - P53768
  800 Ton VERSON, 120” Bed, 15-30 SPM (Variable), Windows, Upgraded electrics, Transfers, CHEAP!, (5) Avail. - P53023
  800 Ton VERSON, 120” Bed, 14” stroke, 12-24 SPM (Variable), Windows, New in 1988 - P53943
  800 Ton VERSON, 120” Bed, 14” stroke, 20 SPM, Windows, Cushions - P53967
  800 Ton NIAGARA, 120” Bed, 20” stroke, Cushions, 15-30 SPM (Variable), Windows, New in 1988 - P53942
  660 Ton STAMTEC, 108” Bed, 15-30 SPM (Variable), Windows, Floor Standing, CHEAP! - P52660
  630 Ton RAVNE, 108” Bed, 15-30 SPM (Variable), Windows, Rolling bolster, Very good, (2) Available - P52623
  600 Ton BLISS, 120” Bed, 20 SPM, CHEAP!, (2) Available - P52638
  600 Ton DANLY, 108” Bed, 20-40 SPM, Windows, Rolling bolster, CHEAP!, (2) Available - P52664
  600 Ton CCI, 108” Bed, 15-30 SPM (Variable), Windows, Must be sold! - P52633
  500 Ton EAGLE, 108” Bed, 12” Stroke, 20-40 SPM, Windows, Floor standing - P51081
  500 Ton USI, 84” Bed, 20” stroke, 25 SPM, Cushions, Rolling bolster, (5) Available - P51994
  400 Ton MINSTER, 108” Bed, 0-80 SPM (Variable), Windows, Floor Standing, Very good condition - P51018
  400 Ton NIAGARA, 108” Bed, 20-60 SPM (Variable), Cushions, Floor Standing - P51981
  400 Ton EAGLE, 108” Bed, 12” stroke, 20-40 SPM, Windows, Floor Standing - P51080
  400 Ton BLISS, 96” Bed, 20-40 SPM (Variable), Windows, Floor Standing, REBUILT - P51077
  330 Ton KOMATSU, 146” Bed, 25-50 SPM (Variable), Windows, Floor Standing - P51076
  300 Ton DANLY, 108” Bed, 16" Stroke, 25-35 SPM, Windows, Cushions - P51042
  300 Ton AIDA, 98” Bed, 14" Stroke, 20-50 SPM, Windows, Rolling bolster - P51044
  300 Ton MINSTER, 84” Bed, 0-80 SPM, Windows, Floor Standing, Very good condition - P51062
  300 Ton MINSTER, 72” Bed, 30-60 SPM, Windows, Floor Standing, CHEAP! - P51082
  200 Ton AIDA, 55” Bed, 30-60 SPM (Variable), Windows, Floor Standing, Very good condition - P50826
  200 Ton MINSTER, 54” Bed, 0-50 SPM (Variable), Windows, Floor Standing, Very good condition - P50822

GAP AND OBI PRESSES

  200 Ton AIDA GAP, 109” x 33" Bed, 10" Stroke, 20-45 SPM (Variable), Good condition - P15327
  200 Ton CLEARING GAP, 60” x 36" Bed, 10" Stroke, 28 SPM, Good condition - P15326
  200 Ton VERSON GAP, 58” x 34" Bed, 12" Stroke, 35 SPM, Good condition, (2) Available - P15325
  75 Ton AIDA OBI, 37.5” x 19.5" Bed, 6" Stroke, 55 SPM, Good condition - P40107

DOUBLE ACTION PRESSES

  3200 Ton DANLY, Double Action, 180" Bed, 42"/36" Stroke, 8-16 SPM, R. Bolster, Micro-Inch - P11193
  3200 Ton DANLY, Double Action, 144" Bed, 42"/32" Stroke, 8-16 SPM, R. Bolster (L-R), 2 Available - P11191

COMPLETE PRESS LINES

  DANLY, (1) 1500T/(3) 1000T, 180" Bed, 20 SPM, Cushions, Rolling bolster, Fully automated - P53041
  KOMATSU, (1) 1600T/(5) 1200T, 134" Bed, 8-16 SPM, Dual Rolling bolsters, Cushions - P53045
  KOMATSU, (1) 1600T/(3) 600T, 134" Bed, 8-15 SPM, Dual Rolling bolsters, (2) Lines - P53042
  DANLY, (4) 1000T, 120" Bed, 10-20 SPM, Cushions, Rolling bolster - P53948
  DANLY, (1) 1600T/(5) 800T, 156" Bed, 18 SPM, May be seen under power - P53940
  DANLY, (1) 1500T/(1) 800T/(2) 600T, 120" Bed, 10-20 SPM - P53947

HYDRAULIC PRESSES

  1000 Ton CLEARING, 144” Bed, 54" Stroke, 74" Shut Height, Very good condition - P21315
  600 Ton MACRODYNE, 96” Bed, 12" Stroke, 28" Daylight, New in 1999 - P21305
  500 Ton Williams-White, SS Hyd. Press, 144” Bed, 42" Stroke, LIKE NEW - 2003, (2) Available - P21312
  300 Ton PACIFIC, SS Hyd. Press, 96” Bed, 24" Stroke, CHEAP! - P21304

FEEDLINES & COIL HANDLING EQUIPMENT

  84” wide x 50,000 lbs, Perfecto Servo Feedline, Max. Thickness - 0.187"@84"/0.250"@48", Very good condition - P70379
  72” wide x 40,000 lbs, Colt Servo Feedline, 0.125” Max. Thickness, Very good condition - P70376
  72” wide x 50,000 lbs, Automatic Servo Feedline, 0.090” Max. Thickness, New in 1996 - P70378
  48” wide x 40,000 lbs, Colt Servo Feedline, 0.210” Max. Thickness, Very good condition - P70377
  26” wide x 6,000 lbs, Minster Servo Feedline, 0.350” Max. Thickness, New in 1995 - P70371
  16” wide x 10,000 lbs, Colt Servo Feedline, "Spacesaver", 0.092” Max. Thickness, New in 2002 - P70354
  HONDA FUKUI ROLL LEVELLER, 72" wide, 0.126" thickness, 11-rolls with pinch roll, New in 1995 - P70373

CUT-TO-LENGTH AND SLITTING LINES

  72” wide x 0.098" thick, Schuler Cut-to-Length Line, 10-90 SPM, New in 1999 - C30302
  64” wide x 60,000 lbs, Heavy Gauge Slitting Line, 0.312” Max. Thickness - P70382
  30” wide x 22,000 lbs, Bronx Slitting Line, 0.270” Max. Thickness - P70381

CRANES AND FORKLIFTS

  125 Ton LORAINE Mobile crane, Diesel - C01303

MISCELLANEOUS EQUIPMENT

  HMS TRANSFER SYSTEM, 900 Series, Like New - Year 2007, (2) Available - X01457
  SKODA Lathe, 50" Face, 157" Centers, 4" spindle bore, 28.5" swing, Very Good condition - L12302
  ZMM-SOPHIA Lathe, 22" Face, 120" Centers, 2.88" spindle bore, 22" swing, Very Good condition - L12303
  BRIDGEPORT Vertical Mill, 58" Table, Variable Speed, Good condition - M17304
  Atlas Die Storage/Retrieval System, Like New Condition, 56 Storage Sections - X01451
  Vibro/Dynamics Isolator Pads, Max load - 53,000 lbs, Set of (4) - X01449
  180” x 96” x 12” – Used bolster plate, T-slotted, 2 Available - X01180
  144” x 96” x 12” – Used bolster plate, T-slotted, 2 Available - X01144
  144” x 96” x 12” – Used rolling carriages, Front-to-back direction, 2 Available - R01144
  84” x 60” x 8” – Used bolster plate, T-slotted, 3 Available - X01084

To request more information or a quotation, please fill in the following form

Name:  *
Company: 
Phone: 
Email:  *
* = Required


Comments:


About Us Contact Us This Page Home
Copyright © 2000 Ball Bros. Machinery, Ltd., All Rights Reserved.
 

email us